WTB i-Head® Ball
product description
A ball-joint is integrated in the i-Head® Ball torch body, the torch head can be turned over 360° and be angulated over 70°. With the different torch heads (size and angle) any possible position may be reached. The position of the torch head can be changed virtually without wear. The spare parts of the torch heads are similar to the international standard, this keeps cost of operation and storage low.
Technical data:
head | cooling | capacity |
duty cycle |
Ø tungsten |
gas | |
AC | DC | ED | mm | l/m | ||
WT9 | air | 85A | 120A | 35% | 0,5 - 1,6 | 4 - 12 |
WT17 | air | 100A | 140A | 35% | 0,5 - 2,4 | 5 - 15 |
WT24 | air | 75A | 110A | 35% | 0,5 - 1,6 | 4 - 12 |
WT20 | water | 150A | 210A | 100% | 0,5 - 3,2 | 5 - 20 |
WT18 | water | 165A | 235A | 100% | 0,5 - 4,0 | 6 - 24 |
WT24W | water | 130A | 180A | 100% | 0,5 - 2,4 | 5 - 20 |
Downloads
Instruction manual TIG Torches EN (1.72 MB)
Info Flyer i-Head® GB (0.76 MB)